In many cases, we need to replace the motor, such as the use of linear motors to replace the traditional rotating electrical machine, or other conditions: the upgrading of old products, technology upgrades, cost savings and so on. So how to replace it? This requires a lot of factors to consider.
　　The following with the Mau Electronics Co., Ltd. teach you how to replace the motor.
　　Replacing a motor must be understood and always kept in mind. Top Priority: Reduce risk. A good replacement solution can effectively reduce the potential problems that may arise during the upgrade process. Without careful management of potential risks in the process of replacement, the probability of system failure increases. Therefore, the cost should not be a decisive factor in the replacement program! A good replacement solution not only reduces the risk effectively and reduces the system cost, but not the cost but the higher potential risk
　　In order to maintain the stability of the system in the installation of new motors, the replacement motor should have the same rotor inertia as the original motor, or as similar as possible; speed and torque matching is equally important. The performance of the replacement motor should meet or exceed the performance of the original motor; although the size is not particularly important for motor performance, but in the replacement process, if the new motor installation size and the original motor the same, to help achieve water The The outline of the two motors should be analyzed to ensure consistency.
　　In general, replacing the servo motor means replacing the drive and the cable, and in a few cases it is even necessary to replace the controller. In this case, the motor winding differences can be a secondary consideration if the manufacturer's recommendations are followed.
　　However, if the replacement motor will be used in conjunction with the original drive, it should be carefully checked. For example, the winding data, the type and resolution of the feedback device, and the cable pin layout must be carefully checked and matched. In addition, different servo motor manufacturers usually use different units and conversion methods for these key parameters. This may lead to difficulties in distinguishing between motor definitions and units in the comparison process.
　　Kunshan Tongmao Electronics Co., Ltd., is a set of linear motor technology research and development, linear motor, voice coil motor, precision linear platform and marketing as one of the manufacturers. Our company's products can provide standard products and OEM products, the company since its inception has been uphold innovation, quality, service concept with the technical innovation, equipment updates, excellent technical personnel, research and development, design products. The company has a large number of users with linear and swing motion system solutions.
　　If you want to know more about the company's information, please visit the company's official website:www.aflrwgde.cn/english/index.asp